Jimy Men's Black Leather Motorcycle Boots

This model is designed for touring, recreational and urban motorcycle riding. It combines the functional character of motorcycle footwear with the comfort needed off the bike, making it suitable for longer rides, stops, sightseeing and everyday commuting. It is aimed at riders looking for leather motorcycle boots they can ride in and comfortably walk in afterward, rather than heavy, rigid track boots.

The additional leather panel is positioned exactly where the boot repeatedly contacts the motorcycle gear lever during shifting. It creates an extra layer of leather between the gear lever and the main upper, so the area exposed to repeated contact is better suited to this type of use. It is a functional detail of the motorcycle-oriented construction that also gives the model a more technical, distinctive look.

Blake, Jimy and Ryan are based on the same core construction of men's leather motorcycle boots. They share a similar silhouette and intended use, so the main difference between them is the type of natural leather and the way its surface is finished. This is what gives each version its distinctive texture, appearance and character.

Blake – natural Crazy Horse leather
Blake is made from black Crazy Horse cowhide leather with a waxed pull-up finish. The surface has a more rugged, natural texture and can develop lighter marks, local scuffs and a gradual patina as the leather bends and ages. This gives every pair more individual character over time. Blake is the right choice for riders looking for classic black leather motorcycle boots with a raw, rugged appearance.

Jimy – natural Kabir leather with a vintage finish
Jimy uses Kabir leather finished to create a stronger vintage effect. The black surface features tonal variation, distressed areas and hand-finished shading that adds visual depth and makes each pair slightly individual. Of the three models, Jimy has the most distinctive, expressive and deliberately aged appearance.

Ryan – natural Crust leather with a smooth black finish
Ryan is made from Crust leather finished in a clean, uniform black. Compared with the pull-up character of Blake and the vintage shading of Jimy, its surface looks smoother, calmer and more consistent. Ryan is the most understated, classic and minimalist version of the three.

Which one should you choose? Choose Blake for a natural pull-up effect and developing patina, Jimy for a stronger vintage look with hand-finished tonal variation, or Ryan if you prefer smooth, clean and uniform black leather.

The Kabir leather used in this style is genuine smooth cowhide with a hand-rubbed finish. Irregular shading, locally rubbed areas and tonal transitions are intentional elements of the vintage effect, not material defects. Because the finish is applied by hand, individual pairs may vary slightly in the placement and intensity of the shading. With wear, the appearance of the leather may gradually change in areas of flexing and friction.

Remove dust and dry dirt with a soft brush or a delicate dry cloth, without rubbing the surface aggressively. For light marks, use a well-wrung, slightly damp cloth only on the affected area. For protection and conditioning, choose gentle products intended for natural, hand-finished grain leather and always test them first on an inconspicuous area. Avoid vigorous scrubbing, strongly pigmented polishes, heavy waxes and excessive oily products, as they can alter the character of the hand-distressed finish.

No. A suitable protective treatment can reduce the absorption of moisture and dirt, but it does not make the leather fully waterproof. Hand-finished leather should not be soaked for prolonged periods or rubbed hard while wet. If the boots get wet, allow them to dry naturally at room temperature, away from direct heat sources.

They serve different purposes. The laces let you fine-tune the fit across the instep and midfoot, while the side zip makes the boots quick to put on and take off without fully unlacing them each time. The combination also shapes the look: the lacing, metal eyelets and zip give the boot a stronger, more distinctive silhouette and reinforce its rugged, masculine character. Instead of looking like a plain, smooth ankle boot, the model has greater visual presence and more personality.

This style runs slightly large. Before choosing a size, check the insole lengths in the size guide and compare them with the insole length of shoes that fit you well. Do not compare the insole length directly with your foot length, as the insole needs to include the extra room required for a proper fit. If you are between two sizes, the smaller size will usually be the better choice.

This style has a standard width, with standard room over the instep and in the forefoot. It is not specifically designed for wide feet. The size guide lists insole lengths and cannot be used to assess the width of the boots. If your feet are noticeably wide, the fit will depend on their individual shape.

Natural leather may feel slightly firmer at first. With wear, it gradually adapts in areas of flex and pressure. Breaking in will not, however, correct insufficient shoe length or an incorrectly chosen size.

The sole is made from TR, or thermoplastic rubber. It has a pronounced multidirectional tread. The sole is approximately 1.5 cm thick at the front and about 3 cm high at the rear. The sole is bonded to the upper.

Yes. The lining and the surface of the insole are made from natural leather, in accordance with this model’s material specification.

Yes. This model is also designed for regular everyday wear. Its versatile shape works well with jeans, chinos and other casual outfits. The exact styling options depend on the design and construction details of the individual model.

Yes. Every pair is handcrafted in our workshop in Poland using traditional shoemaking methods.

Each pair is handcrafted after the order is placed. Standard production and preparation time before dispatch is 3–5 business days. This does not include the carrier’s delivery time.