Handmade Black Leather Men’s Boots – Alex | KarolShoes

$130.00 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Cowhide leather Crazy Horse

Leather lining and insole

TR outsole multidirectional tread

Handmade in Poland

Size EU 39 / UK 5.5 / US 6 (26.5 cm) EU 40 / UK 6.5 / US 7 (27 cm) EU 41 / UK 7 / US 7.5 (27.5 cm) EU 42 / UK 8 / US 8.5 (28 cm) EU 43 / UK 8.5 / US 9 (28.5 cm) EU 44 / UK 9.5 / US 10 (29 cm) EU 45 / UK 10.5 / US 11 (29.5 cm) EU 46 / UK 11.5 / US 12 (30 cm)

Kolor: Czarny

Free shipping

United States

Estimated delivery Calculating delivery…

30-day returns or exchanges Try them on at home

View full details

How does this model fit?

Sizing: Runs slightly large

Width: Standard fit

Instep: Standard instep volume

Toe box: Standard toe box

Check the fit

Cowhide leather Crazy Horse

Lighter marks, creases, scuffs and a gradually developing patina are natural characteristics of Crazy Horse leather.

Learn more

TR outsole multidirectional tread

Black sole made from TR thermoplastic rubber, with a standard profile and pronounced multidirectional tread.

View the outsole

Handmade in Poland

Handmade in our workshop in Poland using traditional shoemaking methods.

See how it’s made

Product details

Men's Black Leather Boots Alex – Crazy Horse Leather

Alex are men's black leather boots with an above-the-ankle design and a distinctive military and biker-inspired character. The upper is made entirely from natural Crazy Horse cowhide leather, and every pair is handcrafted in our workshop in Poland.

The combination of a higher shaft, lace-up fastening, side zipper and leather strap with a metal buckle gives the boots a rugged, distinctive look. Alex works particularly well with military, biker and workwear outfits while remaining suitable for everyday wear.

Natural Crazy Horse leather with a pull-up finish

The upper is made from natural Crazy Horse cowhide leather with a waxed pull-up finish. This type of leather naturally changes its appearance with wear.

Lighter marks, creases, subtle scuffs and a gradually developing patina may appear in areas exposed to bending and friction. These are not defects. They are characteristic features of Crazy Horse leather and make every pair increasingly individual over time.

Laces, side zipper and buckle strap

The lacing system allows you to adjust the fit around the instep and midfoot. A side zipper makes the boots easier to put on and take off without having to fully loosen the laces every time.

A leather strap with a metal buckle adds a distinctive construction detail and reinforces the military and biker-inspired character of the boots.

The shaft is approximately 16 cm high and extends clearly above the ankle.

Leather interior and TR outsole

The lining and the surface of the insole are made from natural leather.

The outsole is made from TR thermoplastic rubber and features a pronounced multidirectional tread. It measures approximately 1.5 cm at the front and 3 cm at the heel and is bonded to the upper using a glued construction.

How do the Alex boots fit?

Alex fits slightly larger than standard sizing. When choosing your size, we recommend using the insole length shown in our size guide and measuring your foot carefully.

If you are between two sizes, the smaller size will usually be the better choice.

The boots are made on a standard-width last and provide a standard amount of space around the instep and toe area.

Natural leather may initially feel slightly firmer. With wear, it gradually adapts in areas of flex and pressure. Breaking in the leather will not, however, correct a shoe that is too short or an incorrectly selected size.

Military, biker and workwear style

Black Alex boots pair particularly well with straight or slightly tapered jeans, cargo trousers, overshirts, leather jackets, field jackets and heavier coats.

They work especially well with black, graphite, khaki, denim, leather and heavier fabrics.

Handcrafted in Poland

Every pair of Alex boots is handcrafted in our workshop in Poland using traditional shoemaking methods.

The boots are made after your order is placed. The current standard production and order preparation time is 3–5 business days. Delivery time is not included in this period.

✓
Cowhide leather Crazy Horse
✓
Leather lining and insole
✓
TR outsole multidirectional tread
✓
Handmade in Poland

Shaft height approx. 16 cm

Outsole 1.5 cm (front) / 3 cm (rear)

Closure Lace-up + Side zipper + Buckle strap

Pair weight Approx. 1.4 kg

Sole attachment Cemented construction

Fit & sizing

Sizing Runs slightly large

This model runs slightly larger than standard sizing. Before choosing a size, compare the listed insole length with a pair of shoes that fits you well.

Width Standard fit

This model is made on a standard-width last.

Instep Standard instep volume

This model provides a standard amount of room over the instep.

Toe box Standard toe box

The toe box offers a standard amount of room for the toes.

Natural leather may require a short break-in period

Natural leather may feel slightly firm at first. During the first few days, wear the shoes for shorter periods so the leather can gradually adapt at flex and pressure points. Breaking in will not correct insufficient length or an incorrectly chosen size.

Size guide

Check the exact insole lengths and foot-measuring instructions before choosing your size.

View size guide

Materials & construction

Upper Full leather upper

Natural cowhide leather

The upper is made entirely from natural cowhide leather. The leather type, surface finish and recommended care profile vary by model.

Leather Crazy Horse leather

Natural cowhide leather with a rugged, waxed pull-up finish. Well suited to biker boots, workwear footwear, military-inspired styles and leather boots above the ankle.

Lighter marks, creases, scuffs and a gradually developing patina are natural characteristics of Crazy Horse leather. The material changes with wear, giving each pair an individual appearance.

Lining & insole Leather lining and leather-covered insole

The lining and the top surface of the insole are made from natural pigskin leather. This keeps the foot in direct contact with a natural material and reflects the construction standard of traditionally crafted leather footwear.

Outsole TR sole 1.5/3 cm with multidirectional tread

Black sole made from TR thermoplastic rubber, with a standard profile and pronounced multidirectional tread. The sole measures approximately 1.5 cm at the forefoot and 3 cm at the heel. It is used for lace-up boots and selected motorcycle- and military-inspired styles. The sole is cemented to the upper using technical footwear adhesives after the bonding surfaces have been properly prepared and pressed.

Care

Before first wear

Before first wear, apply a light, even layer of protector suitable for natural, waxed or oiled leather. Test the product on a hidden area first, as it may darken the leather or alter the pull-up effect. Allow the footwear to dry completely at room temperature.

Cleaning

Remove dust, sand and dry dirt with a soft brush or a clean, dry cloth. For minor marks, use a well-wrung, slightly damp cloth on the affected area only. Do not soak the leather or scrub it aggressively.

Regular care

When the leather begins to look dry, apply a small amount of colourless product intended for Crazy Horse, oiled or waxed leather. Apply a thin, even layer without over-conditioning. Each application may slightly darken the leather and reduce the visibility of lighter scuffs.

Moisture protection

For protection against everyday moisture, use a protector intended for natural or waxed leather. The treatment reduces water and dirt absorption but does not provide full waterproofing. Crazy Horse leather footwear should not be soaked for long periods or used like rubber footwear.

After getting wet

Blot away surface moisture with a dry, absorbent cloth. Insert shoe trees or clean paper to help retain the shape. Leave the footwear to dry naturally at room temperature, away from radiators, hairdryers, fireplaces and direct sunlight. Once fully dry, reapply a suitable protector or a small amount of leather conditioner if required.

What to avoid

Avoid heavily covering coloured polishes, unsuitable creams, harsh detergents, large amounts of water and intensive scrubbing. Do not use petrol, solvents, acetone, degreasers or workshop chemicals. Excessive grease or wax can significantly darken the leather and alter its natural character.

Styling

Biker: jeans and a leather jacket

Biker-style leather boots pair well with straight or slightly tapered jeans, a leather jacket, chunky knitwear and a heavier overcoat. They work especially well in bold, masculine outfits built around black, charcoal, denim, leather and strongly textured fabrics.

Military: jeans, cargo trousers and a field jacket

Military-style Chelsea boots and lace-up boots pair well with straight jeans, cargo trousers, chinos, a field jacket and a wool overcoat. They look strongest with black, brown, khaki, charcoal, denim, canvas and other rugged fabrics.

Workwear: denim, an overshirt and heavyweight fabrics

Rugged leather boots with workwear styling pair well with straight jeans, heavyweight cotton trousers, cargo trousers, an overshirt, chore jacket, thick knitwear and a substantial overcoat. They work best with denim, canvas, leather and other durable textured fabrics.

Production

Handmade in Poland

Handmade in our workshop in Poland using traditional shoemaking methods.

Production method Handmade

Country of manufacture Poland

Order preparation Made to order – dispatch preparation in 3–5 business days

This style is handmade after the order is placed. Standard production and preparation before dispatch take 3–5 business days. This timeframe does not include carrier transit time.

Manufacturer and responsible operator

Manufacturer / responsible economic operator
KARDAV Sp. z o.o.

Kościuszki 142C
42-300 Myszków
Poland

info@kardav.com
+48696426079

Returns & exchanges

Returns & Exchanges

You may return or exchange your order within 30 days of receiving your parcel. The shoes must be clean, unworn, unused, and returned in their original packaging.

Return: once we receive and inspect the returned product, your refund will be processed in accordance with applicable regulations.
Size or model exchange: exchanges are processed after we receive and verify the returned pair.
Return shipping cost: paid by the customer. We do not accept cash-on-delivery parcels.
Personalized products: custom or personalized items cannot be returned or exchanged.

Before sending the parcel back, please submit your return or exchange request through our portal:
Submit a return or exchange request

Please include a note inside the parcel with your order number, full name, and information whether it is a return or an exchange. For exchanges, please also include the desired size or model.

Return and exchange address:
KarolShoes / KARDAV Sp. z o.o.
ul. Tadeusza Kościuszki 142c
42-300 Myszków
Poland

Full return and exchange policy: Returns & Exchanges – full information

Reviews (31)

FAQ

Frequently asked questions about the Alex model

Are the boots handcrafted in Poland?

Yes. Every pair is handcrafted in our workshop in Poland using traditional shoemaking methods.

Is the inside of the boots made from natural leather?

Yes. The lining and the surface of the insole are made from natural leather, in accordance with this model’s material specification.

What is the outsole made of?

The outsole is made from TR, or thermoplastic rubber. This model uses a pronounced multidirectional tread. The outsole is bonded to the upper using a glued construction.

Is Crazy Horse leather waterproof?

No. Crazy Horse leather is not fully waterproof. Proper impregnation can reduce the absorption of moisture and dirt, but it does not make the footwear waterproof. Avoid prolonged soaking and never dry the boots directly next to a radiator or other heat source.

How should Crazy Horse leather be cared for?

Dust and dry dirt are best removed with a soft brush or cloth. For light marks, use a well-wrung, slightly damp cloth on the affected area. For periodic care, use products intended for Crazy Horse, oiled or waxed leather. Always test the product first on a less visible area.

Are lighter marks and scuffs on the leather a defect?

No. With Crazy Horse leather, changes in shade, lighter marks at flex points and local scuffs are characteristic of its waxed pull-up finish. They are not material defects, but part of the leather’s natural appearance.

Does natural leather need breaking in?

Natural leather may feel slightly firmer at first. With wear, it gradually adapts in areas of flex and pressure. Breaking in will not, however, correct insufficient shoe length or an incorrectly chosen size.

Is this model suitable for wide feet?

This model is made on a standard-width last and provides a standard amount of room around the instep and forefoot. If you have distinctly wide feet, we recommend comparing your foot measurements carefully with the size guide and taking your individual foot shape into account.

Does the side zip make the boots easier to put on?

Yes. The side zip makes the boots easier to put on and take off every day. The lacing still allows you to adjust the fit around the instep and midfoot, while the zip reduces the need to fully undo the laces each time.

How does this model fit?

This model fits slightly larger than standard sizing. When choosing a size, use the insole length shown in the size guide and measure your foot carefully. If you are between two sizes, the smaller size will usually be the better choice.

Does Crazy Horse leather change in appearance with wear?

Yes. Lighter marks, creases, local scuffs and a gradually developing patina are natural characteristics of Crazy Horse leather. The material evolves with wear, so each pair develops its own individual character over time.

Is this model suitable for everyday wear?

Yes. This model is designed with regular everyday wear in mind. The higher leather upper, adjustable lacing, side zip and TR outsole create a practical construction for daily use. Its distinctive military and biker-inspired character does not limit it to specific outfits and makes it easy to style for everyday wear.

HANDMADE IN POLAND

Craftsmanship in your hands

Every pair of KarolShoes is made in our workshop in Poland. From preparing the leather, through stitching and assembly, to final inspection, every stage is handled by people — not an anonymous production line.

It all starts with a piece of leather.

Since 1990. Craftsmanship that endures.

Every pair has its own character.

Item added to your cart

Handmade Black Leather Men’s Boots – Alex | KarolShoes